13 APR 15: Page 26-2 step 5 debur, pg 26-3 steps 1-2: 2.75 hours

More deburring and match-drilling of seat rib assemblies – no pics.

14 APR 15: Page 26-3 steps 3-7: 1 hour

More deburring and match-drilling of seat rib assemblies.  Light on the write up and pictures; need new batteries in the camera flash – no pics.

15 APR 15: Page 26-3 step 7 debur: 1.75 hours

There is a common theme here - more deburring and match-drilling of seat rib assemblies – no pics.

16 APR 15: Deburring, Page 26-4 steps 1-3: 2.3 hours

Cut and match-drilled the flap actuator bracket.  Still no batteries for the camera flash – no pics.

17 APR 15: Page 26-5 steps 1-4: 1.75 hours

Finally picked up batteries for the flash – may have pics in this post!  Fluted the lower flange of the F-1015A-L/R ribs to match the F-1076 center bottom skin.  Match-drilled the rib subassemblies to the rear spar bulkhead.  Final drilled the seat belt attach ribs and lugs:

18 APR 15: Page 26-5 steps 5-6, debur: 6.5 hours

Clecoed and final-drilled the rear seat ribs to the rear spar bulkhead:

The rest of the session was spent on my favorite task – deburring.  Ahhhhhhhhh!!!!!!!!!!