I have been sick all week, so didn't get much work done.

28 SEP 14: Page 17-2 steps 4-5: 5.25 hours

Constructed cradle for leading edges.  Removed W-1019-L/R splice strips from the T-1001-L/R fuel tank skins.  Deburred the edges of the splice strips and fuel tank skins – no pics.

29 SEP 14: Page 17-2 step 6: 2 hours

Finished deburring fuel tank skins – no pics.

01 OCT 14: Page 17-2 step 1: 1.5 hours

Fluted and straightened all rib flanges – no pics.

04 OCT 14: Page 17-3 step 1-8: 5.5 hours

Clecoed the W-1009-L/R, W-1009-1L and W-1009-2L ribs to the skin.  Inserted the W-1019-L splice strip into the inboard end of the leading edge skin then inserted the W-1008-L splice strip rib and clecoed the splice rib, strip, and skin together:

Drilling the j-stiffener to the leading edge skin: 

Final-drilled #40 all the ribs and splice strip to the skin.  Enlarged all screw holes in the splice strip to #19.  Countersunk the #40 nutplate attach holes in the splice strip for the head of a 426-3 rivet:

All of the leading edge parts deburred and ready for priming.  Begin on the right leading edge tomorrow: