21 SEP 14: Page 16-2 steps 5-6: 2 hours

Finished deburring top wing skins – no pics.

23 SEP 14: Prepping wing skins for priming: 2 hours

Used my random orbital car buffer with a maroon scotchbrite pad to prep the skins – much faster and easier than using the pads by hand – no pics.

26 SEP 14: Page 17-2 steps 2-3: 2 hours

Fabricated the W-1026 leading edge J-stiffeners for the l/r wing assemblies.  Modified two W-1009-L/R leading edge ribs for each wing assembly:

27 SEP 14: Page 17-2 steps 4-6: 7 hours

Created cradles for leading edge/tank assemblies:

Removed the W-1019-L/R splice strips from the T-1001-L/R fuel tank skins.  Deburring the splice strip:

Deburring the edges of the tank skins:

Finished deburring the leading edge ribs.