20 MAY 14: Page 10-11 steps 1-2: 1.25 hours

Clamped the longerons to the F-1014 aft deck and side skins.  Match-drilled all common holes of the F-1073 side skin into the F-1032 longerons – no pics.

21 MAY 14: Page 10-11 steps 2-5: 3.75 hours

Match-drilled all common holes of the F-1073 side skin into the F-1032 longerons.  Match-drilled the holes of the F-1073L/R side skins into the flanges of the F-1012B bulkhead and all the remaining skin to bulkhead and frame holes on each side of the tailcone.  Final-drilled all the 3/32” holes common to the F-1012A/B bulkhead webs and the top of the bulkhead webs common the the F-1014 aft deck.  Final-drilled the skin to frame/bulkhead holes on the bottom of the tailcone.  Final-drilled the holes along the edge of the F-1073 side skins and the F-1078/1079 bottom skins:

22 MAY 14: Page 10-12 steps 1-5: 1 hour

Clecoed the F-1009 frame to the forward end of the F-1014 aft deck:

 Final-drilled the holes common to the F-1014 aft deck and F-1009 bulkhead.  Fluted the frames and bulkheads.  Clecoed the F-1075 aft top skin to the F-1007, F-1008, and F-1009 frames and the F-1073 side skins:

23 MAY 14: Page 10-12 steps 6-9: 3.5 hours

Match-drilled the F-1047A and F-1047B stiffeners to the F-1075 aft top skin:

Clecoed the F-1074 forward top skin to the F-1006 bulkhead, F-1007 frame, F-1075 aft top skin, the F-1073 side skins, and the F-1032 longerons.  Match-drilled the holes of the F-1074 forward top skin into the F-1047 stiffeners.  Final drilled the rest of the holes associated with the F-1074 and F-1075 top skins: