28 NOV 16: Page 43-9 step 1: 1.5 hours

Cut and fit the C-1004-L/R windows:

1/2 DEC 16: Page 43-8 step 4-8, fit overhead console, 43-9 step 1, 45-08 steps 1-2 : 8.25 hours

Match-drilled #12 the WD-1043 center cabin brace to the F-1044A forward cabin rib and the F-1044B angle.  Trimmed and fit the C-1005 windscreen:

Trimmed and fit overhead console:

Finished trimming side/rear windows.  I’m not sure what is worse plexi or fiberglass dust!

3 DEC 16: Page 45-2 steps 3-4 (L), page 45-4 steps 1-5 (L): 5 hours

Sanded the inside mating surfaces of the C-1002A/B-L cabin door shells:

Match-drilled and clecoed the C-1002A/B-L cabin door to the cabin cover.  The  plans have you tape the door to the cabin top, but like those who have done this before me, I chose to drill into the top and secure with clecos all the way around to get a better fit for final epoxying of the inner/outer door shells: