24 NOV 15: Section 37, fuel system: 4.5 hours
Riveted angle to center tunnel:
Fuel pump fit into angles:
Everything fit into place. When I remake the line from the filter to the
pump, I’ll have to angle it further away from the pump cover plate as it comes
quite close to the upper right mounting bolt.
I also have to adjust the angle of the line from the pump to the
transducer. Originally when I made the
line, the fitting on the input side of transducer was at 3:00. Now that it is fully installed, it ended up
at 12:00 – very short line, will be tough to make those angles work, but I’ll figure something out:
No comments:
Post a Comment