1 MAR 15: Primed right aileron skins, page 20-6 step 4, pg 22-8 steps 4-8: 5.5 hours

Primed right aileron skins – for the second time.  Didn’t mess these up.  Had some Devilbiss 3oz containers that a friend gave me – very convenient for this job:

Skins all primed.  Will let them cure a couple days, dimple them, and then back rivet the stiffeners – again!

Installed the W-822PP wing access plates onto the left wing:

Prosealed the trailing edge of the left flap.  Will let it cure for a few days and then finish riveting the flap.  I’ll be glad when the control surfaces are done and I can say good bye to Proseal – more or less.